Summary:
Solid tires are currently only used for high-load vehicles or machinery that travel at low speeds, and are also used in fixed-position machinery. Com...
Solid tires are currently only used for high-load vehicles or machinery that travel at low speeds, and are also used in fixed-position machinery. Compared with pneumatic tires, solid tires are more wear-resistant. Solid tires are mainly used for industrial vehicles such as low-speed and high-load hoisting vehicles, traction vehicles, and flat scooters, and solid tires are also widely used in all walks of life. If there is damage, what should be done? The following electric forklift manufacturers will take you to popularize it!
1. When the inner tube is found to have small holes, it can be hot or cold. File the roughness around the damage of the inner tube, stick the fire repair glue on the damage, and make the hole just in the middle of the repair glue, then install the tire repair clip against the normalizing glue, tighten the screw and then ignite The heating agent on the fire repair glue can be tightly bonded after 10-15 minutes.
2. When the outer tire of the solid tire has cracks, holes, blistering, delamination and other damages, it should be repaired or overhauled according to the specific conditions. When there are successive cracks around the tire carcass, the tread rubber has been polished and there are large holes, the carcass line layer has an annular rupture and the whole circle is separated, it should be replaced.
3. Timely replacement: If the inner tube has problems such as folding, serious rupture, aging, stickiness, deformation, etc. that cannot be corrected, it needs to be replaced in time. Develop together to check the tire pressure regularly, try to check it every other month, if the tire pressure is not enough, it should be made up in time. Routine inspections are also required before boarding the expressway to ensure driving safety.
English
��������
Espaol
Deutsche
