Summary:With the development of the logistics and warehousing industry, electric pallet trucks have played an important role in the warehousing industry. When...
With the development of the logistics and warehousing industry, electric pallet trucks have played an important role in the warehousing industry. When the goods are too heavy or the place is too high, electric pallets can be used, which saves manpower and time to a large extent. Electric pallet trucks refer to forklifts that use electricity to work, and most of them work with batteries. The accumulator is a kind of battery, and its function is to store the limited electric energy and use it in a suitable place. Its working principle is to convert chemical energy into electrical energy.
When the electric pallet truck is walking slowly, you can do the following inspections on the following electric pallet truck accessories:
1. Check whether the battery voltage of the electric pallet truck accessories is too low. If the voltage is no problem, check whether the battery power is enough to replace the electric pallet truck for normal operation. The troubleshooting methods are: if the battery has no voltage or the voltage is too low, directly charge the battery to supplement the power.
2. Check whether the electric pallet truck drive system accessories such as switches and circuits are loose or short-circuited, and whether the micro switch is damaged. Remedy: repair and clean up the circuit, replace or repair the micro switch.
3. Check whether the drive contactor assembly of the electric pallet truck parts is burnt out, or the coil is short-circuited, open circuit or poor contact, troubleshooting: repair the platinum contacts of the electric pallet truck contactor or directly replace a new hydraulic contactor Assembly.
4. Check whether the drive module is burnt out, short-circuited, or disconnected. Remedy: repair or replace the module assembly.
5. Check whether the drive board or power board is burnt out or short-circuited.
6. Check whether the power supply voltage of the drive motor is coming over, check whether the motor is short-circuited or open circuit and leakage, and check whether the carbon brush is severely worn. Remedy: repair the circuit, replace the carbon brush of the motor and repair the copper head of the motor, repair the hydraulic motor assembly or replace with a new hydraulic motor.
7. Check whether the drive gearbox, gears, angle gears or drive wheels of the electric pallet truck are damaged. The troubleshooting method: disassemble the damaged and repair it or directly replace the new gearbox assembly. If the gear is damaged, replace it directly with a new one. Gears, replace the angle gears or drive wheels with new ones.
English
��������
Espaol
Deutsche
